3Com 3CRUS2475 User Manual page 212

212 C 10: C
HAPTER ONFIGURING
M F
ULITCAST ORWARDING
Excluded — Excludes the interface from the Multicast group.
■
None — Indicates the port is not part of a Multicast group.
■
2 Select the Interface Status.
3 Click
. The Interface Status is set, and the device is enabled.
To view Port Details:
1 Click Policy > Multicast > Multicast Group > Port Details. The
Multicast Port Details Page opens:
Figure 110 Multicast Port Details Page
The Multicast Port Details Page contains the following information:
VLAN ID — Identifies a VLAN and contains information about the
■
Multicast group address.
Bridge Multicast Address — Identifies the Multicast group MAC/IP
■
address.
Ports/LAG — Ports that can be added to a Multicast service.
■
Interface — Displays the port number.
■
Interface Status— Indicates the port status. The possible field values
■
are: