Mac-Based Traffic Groupings; Permanent Mac Addresses; Dynamic Mac Addresses - 3Com 9100 User Manual

MAC-Based Traffic
Groupings
Table 26 Traffic Groupings by Precedence (continued)
Destination Address
MAC-based Groupings
Blackhole
Broadcast/unknown rate
limiting
QoS profiles can be assigned to destination MAC addresses. The various
options that fall into this category are as follows:
Permanent
Dynamic
Blackhole
Broadcast/unknown rate limiting
MAC-based traffic groupings are configured using the following
command:
create fdbentry <mac_address> vlan <name> [blackhole | port
<portlist> | dynamic] qosprofile <qosname>

Permanent MAC addresses

Permanent MAC addresses can be assigned a QoS profile whenever
traffic is destined to the MAC address. This can be done when you create
a permanent FDB entry. For example:
create fdbentry 00:11:22:33:44:55 vlan default port 1
qosprofile qp2

Dynamic MAC Addresses

Dynamic MAC addresses can be assigned a QoS profile whenever traffic is
destined to the MAC address. For any port on which the specified MAC
address is learned in the specified VLAN, the port is assigned the specified
QoS profile. For example:
create fdbentry 00:11:22:33:44:55 vlan default dynamic
qosprofile qp3
The QoS profile is assigned when the MAC address is learned. If the MAC
address entry already exists in the FDB, you can clear the forwarding
database so that the QoS profile can be applied when the entry is added
again.
Traffic Groupings and Creating a QoS Policy
Packet Priority
Groupings
103
Physical/Logical
Groupings