196
C
9: C
HAPTER
ONFIGURING
Removing ARP Entries
IP I
NFORMATION
Clear ARP Table Entries — Specifies the types of ARP entries that are
■
cleared. The possible values are:
None — Maintains the ARP entries.
■
All — Clears all ARP entries.
■
Dynamic — Clears only dynamic ARP entries.
■
Static — Clears only static ARP entries.
■
2 Define the fields.
3 Click
. The ARP parameters are defined, and the device is
updated.
To remove ARP Entries:
1 Click Administration > IP Addressing > ARP Settings > Remove. The
ARP Settings Remove Page opens:
Figure 101 ARP Settings Remove Page
The ARP Settings Remove Page provides parameters for removing ARP
entries from the ARP Table. The ARP Settings Remove Page contains the
following fields:
Remove — Removes a specific ARP entry. The possible field values
■
are:
Checked — Removes the selected ARP entries.
■