3Com 3CRUS2475 User Manual page 38

38 C 3: V
HAPTER IEWING
B S
ASIC ETTINGS
MAC Address — Displays the MAC Address assigned to the access
■
point.
Type — Displays the antenna type.
■
Radios —
Displays the radio type attached to the access point.
■
field values are:
A — Indicates the radio type is 802.11a and provides specifications
■
for wireless ATM systems
G — Indicates the radio type is 802.11g that offers transmission
■
over relatively short distances at up to 54 mbps.
b/g — Indicates the radio type is 802.11b/g.
■
n — Indicates the radio type that is based on MIMO (Multiple
■
input, multiple output) technology, which uses multiple antennas
at both the source (transmitter) and the destination (receiver) to
minimize errors and optimize data speed.
Channel — Displays the access point channel used.
■
State — Displays the selected access point transceiver's status. The
■
possible field values are:
Disabled — Indicates the Access Point is currently disabled.
■
Enabled — Indicates the Access point is currently enabled.
■
Activation — Indicates the access point state. The possible field
■
values are:
Activated — Indicates access point is currently active.
■
Discovered — Indicates access point was discovered, but was not
■
activated by the user.
2 Select an option from the Display drop-down list.
.
The possible