3Com 3CRUS2475 User Manual page 159

To configure Wireless Access Points:
1 Click Wireless > Access Point > Setup. The Wireless Access Point Setup
Page opens:
Figure 78 Wireless Access Point Setup Page
The Wireless Access Point Setup Page contains the following fields:
Access Point — Displays the current Access Points.
■
Activation State — Indicates the access point state. The possible
■
field values are:
Activated — Indicates access point is currently active.
■
Discovered — Indicates access point was discovered, but was not
■
activated by the user.
Name — Displays the user-defined access point name.
■
Radio 802.11b/g— Enables High-frequency and longer transmission
■
ranges.
Radio 802.11a— Enables radio 802.11a transmissions.
■
2 Define the fields.
3 Click
. The Access Point is enabled, and the device is updated.
Defining Wireless Access Points 159