3Com 3CRUS2475 User Manual page 141

Dynamic — Indicates the VLAN was dynamically created through
■
GVRP.
Static — Indicates the VLAN is user-defined.
■
Default — Indicates the VLAN is the default VLAN.
■
Authentication — Indicates whether authentication is enabled for
■
the specific VLAN ID. The possible field values are:
Enabled — Indicates authentication is disabled for the specified
■
VLAN ID.
Disabled — Indicates authentication is enabled for the specified
■
VLAN ID.
The Setup Page creates VLANS on the system.
To create VLANs:
1 Click Policy > VLAN > Setup > Setup. The VLAN Setup [Setup]Page
opens:
Figure 67 VLAN Setup [Setup]Page
The Setup Page contains the following fields:
VLAN ID — Displays the VLAN ID.
■
VLAN Name — Displays the user-defined VLAN name.
■
2 Define the fields.
Defining VLAN Properties 141