3Com 3CRUS2475 User Manual page 67

To modify Port Security:
1 Click Policy > Security > Port Security > Modify. The Port Security
Modify Page opens:
Figure 36 Port Security Modify Page
The Port Security Modify Page contains the following fields:
Interface — Displays the port or LAG name.
■
Enable Lock Interface —
■
locked, all the current addresses that had been dynamically learned by the
switch on that port, are transformed to static MAC addresses. When the
port is unlocked, they are removed from the static list.
Learning Mode — Defines the locked port type. The Learning Mode
■
field is enabled only if Locked is selected in the Set Port field.The
possible field values are:
Classic Lock — Locks the port using the classic lock mechanism.
■
The port is immediately locked, regardless of the number of
addresses that have already been learned.
Limited Dynamic Lock — Locks the port by deleting the current
■
dynamic MAC addresses associated with the port. The port learns
up to the maximum addresses allowed on the port. Both relearning
and aging MAC addresses are enabled.
Managing Port Security
Enables locking the port. When a port is
67