Configuring Rmon History - 3Com 3CRUS2475 User Manual

274 C 15: V
HAPTER IEWING
Configuring RMON
History
S
TATISTICS
The RMON History Control Summary Page contains information about
samples of data taken from ports. For example, the samples may include
interface definitions or polling periods.
To view RMON History:
1 Click Wired Ports > Stats > RMON History > Control Summary. The
RMON History Control Summary Page opens:
Figure 142 RMON History Control Summary Page
The RMON History Control Summary Page contains the following fields:
History Entry No. — Displays the entry number for the History
■
Control Table page.
Source Interface — Displays the interface from which the history
■
samples were taken. The possible field values are:
Port — Specifies the port from which the RMON information was
■
taken.
Sampling Interval — Indicates in seconds the time that samplings
■
are taken from the ports. The field range is 1-3600. The default is
1800 seconds (equal to 30 minutes).
Sampling Requested — Displays the number of samples to be
■
saved. The field range is 1-65535. The default value is 50.