3Com 3CRUS2475 User Manual page 248

248 C 12: C
HAPTER ONFIGURING
Q S
UALITY OF ERVICE
Interface — Displays the interface for which the global QoS
■
parameters are defined.
Default CoS — Displays the default CoS value for incoming packets
■
for which a VLAN tag is not defined. The possible field values are 0-7.
The default CoS is 0.
Restore Defaults — Displays the device factory defaults for mapping
■
CoS values to a forwarding queue.
2 Select the Restore Defaults field to restore Interface factory defaults.
To configure CoS Settings:
1 Click Policy > QoS General > CoS > Modify. The CoS Modify Page
opens:
Figure 128 CoS Modify Page
The CoS Modify Page contains the following fields:
QoS Mode — Determines the QoS mode on the interface. The
■
possible values are:
Disable — Disables QoS on the interface.
■
Basic — Enables Basic mode on the device.
■
Advanced — Enables the Advanced QoS mode on the device.
■
Interface — Displays the interface for which the global QoS
■
parameters are defined. The possible values are: