To modify Multiple Hosts:
1 Click Policy > Security > Multiple Host > Modify. The Multiple Host
Modify Page opens:
Figure 34 Multiple Host Modify Page
The Multiple Host Modify Page contains the following fields:
Port — Displays the port number for which advanced port-based
■
authentication is enabled.
Enable Multiple Hosts — Indicates whether multiple hosts are
■
enabled. Multiple hosts must be enabled in order to either disable the
ingress-filter, or to use port-lock security on the selected port. The
possible field values are:
Multiple — Multiple hosts are enabled.
■
Disable— Multiple hosts are disabled.
■
Action on Violation — Defines the action to be applied to packets
■
arriving in single-host mode, from a host whose MAC address is not
the supplicant MAC address. The possible field values are:
Forward — Forwards the packet.
■
Discard — Discards the packets. This is the default value.
■
Shutdown — Discards the packets and shuts down the port. The
■
port remains shut down until reactivated, or until the device is
reset.
Modifying Multiple Hosts
63