3Com 3CRUS2475 User Manual page 152

152 C 7: C
HAPTER ONFIGURING
VLAN
S
Ports — Displays the GVRP port configuration.
■
LAGs — Displays the GVRP LAGs configuration.
■
GVRP State — Indicates if GVRP is enabled on the selected interface.
■
The possible field values are:
Enable — Enables GVRP on the interface.
■
Disable — Disables GVRP on the interface. This is the default value.
■
Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is
■
enabled on the interface. The possible field values are:
Enabled — Enables Dynamic VLAN creation on the interface.
■
Disabled — Disables Dynamic VLAN creation on the interface.
■
GVRP Registration — Indicates if VLAN registration through GVRP is
■
enabled on the device. The possible field values are:
Enabled — Enables GVRP registration on the device.
■
Disabled — Disables GVRP registration on the device.
■
To configure GVRP:
1 Click Policy > VLAN > GVRP > Modify. The GVRP Modify Page opens:
Figure 75 GVRP Modify Page
The GVRP Modify Page contains the following fields: