Defining Mstp Port Settings - 3Com 3CRUS2475 User Manual

Defining MSTP Port
Settings
Network Administrators can assign MSTP port settings in the Multiple STP
Modify Port Page.
To define Multiple STP Port settings:
1 Click Policy > Spanning Tree > Multiple STP > Modify Port. The
Multiple STP Modify Port Page opens:
Figure 123 Multiple STP Modify Port Page
The Multiple STP Modify Port Page contains the following fields:
Instance ID — Lists the MSTP instances configured on the device.
■
Possible field range is 0-15.
Port State— Indicates whether the port is enabled for the specific
■
instance. The possible field values are:
Enabled — Enables the port for the specific instance.
■
Disabled — Disables the port for the specific instance.
■
Type — Indicates whether the port is a Boundary or Master port. The
■
possible field values are:
Boundary Port — Indicates that the port is a Boundary port. A
■
Boundary port attaches MST bridges to LANs in an outlying region.

Defining MSTP Port Settings

239