Aging Interval (10-630) — Specifies the amount of time the MAC
■
Address remains in the Dynamic MAC Address before it is timed out if
no traffic from the source is detected. The default value is 300
seconds.
Clear Table — Clears the Dynamic Address table when checked.
■
Interface — Specifies the interface for which the table is queried.
■
There are two interface types from which to select. Port or LAG
MAC Address — Specifies the MAC address for which the table is
■
queried.
VLAN ID — The VLAN ID for which the table is queried.
■
Address Table Sort Key — Specifies the means by which the
■
Dynamic Address Table is sorted. The address table can be sorted by
address, VLAN or interface.
2 Select the check box to remove the selected ARP entries.
3 Click
. The ARP entries are deleted, and the device is updated.
Viewing Dynamic Addresses
203