To configure Port Setup:
1 Click Policy > Multicast > Multicast Group > Setup Port. The
Multicast Port Setup Page opens:
Figure 109 Multicast Port Setup Page
The Multicast Port Setup Page contains the following information:
VLAN ID — Identifies a VLAN and contains information about the
■
Multicast group address.
Bridge Multicast IP Address — Identifies the Multicast group IP
■
address.
Bridge Multicast IP Address — Identifies the Multicast group MAC
■
address.
Interface — Displays the port number.
■
Interface Status— Indicates the port status. The possible field values
■
are:
Static — Attaches the port to the Multicast group as static
■
member.
Forbidden — Indicates the port is not included in the Multicast
■
group, even if IGMP snooping designated the port to join a
Multicast group.
Defining Multicast Groups
211