Authenticator State — Displays the current authenticator state.
■
1 Click Policy > Security > Port Authentication > Modify. The Port
Authentication Modify Page opens:
Figure 31 Port Authentication Modify Page
The Port Authentication Modify Page contains the following fields:
Port — Displays a list of interfaces on which port-based
■
authentication is enabled.
Admin Port Control — Displays the admin port authorization state.
■
ForceUnauthorized — Indicates that either the port control is force
■
Unauthorized and the port link is down, or the port control is Auto
but a client has not been authenticated via the port.
ForceAuthorized — Indicates that the port control is Forced
■
Authorized, and clients have full port access.
Auto — Indicates that the port control is Auto and a single client
■
has been authenticated via the port.
Current Port Control — Displays the current port authorization state.
■
Enable Guest VLAN — Specifies whether the Guest VLAN is enabled
■
on the device. The possible field values are:
Modifying Port Authentication
57