Defining Arp Interface Settings - 3Com 3CRUS2475 User Manual

Defining ARP
Interface Settings
To configure ARP Entries:
1 Click Administration > IP Addressing > ARP Settings > Setup. The
ARP Settings Setup Page opens:
Figure 100 ARP Settings Setup Page
The ARP Settings Setup Page allows network managers to define ARP
parameters for specific interfaces. The ARP Settings Setup Page contains
the following fields:
Interface — Displays the interface type for which ARP parameters are
■
displayed. The possible field value is:
VLAN — Indicates the VLAN for which ARP parameters are
■
defined.
IP Address — Indicates the station IP address, which is associated
■
with the MAC address filled in below.
MAC Address — Displays the station MAC address, which is
■
associated in the ARP table with the IP address.
ARP Entry Age Out — Specifies the amount of time (in seconds) that
■
passes between ARP Table entry requests. Following the ARP Entry
Age period, the entry is deleted from the table. The range is 1 -
40000000. The default value is 60000 seconds.

Defining ARP Interface Settings

195