Enabling IGMP
Snooping
The IGMP Snooping Setup Page allows network manages to define IGMP
Snooping parameters:
To enable IGMP Snooping:
1 Click Policy > Multicast > IGMP Snooping > Setup. The IGMP
Snooping Setup Page opens:
Figure 106 IGMP Snooping Setup Page
The IGMP Snooping Setup Page contains the following fields:
IGMP Snooping Status — Indicates if IGMP Snooping is enabled on
■
the device. IGMP Snooping can be enabled only if Bridge Multicast
Filtering is enabled. The possible field values are:
Enable — Indicates that IGMP Snooping is enabled on the device.
■
Disable — Indicates that IGMP Snooping is disabled on the device.
■
VLAN ID — Specifies the VLAN ID.
■
IGMP Snooping Status — Indicates if IGMP snooping is enabled on
■
the VLAN. The possible field values are:
Enable — Enables IGMP Snooping on the VLAN.
■
Disable — Disables IGMP Snooping on the VLAN.
■
Enabling IGMP Snooping
207