Defining Static Addresses - 3Com 3CRUS2475 User Manual

200 C 9: C
HAPTER ONFIGURING
Defining Static
Addresses
IP I
NFORMATION
The Static Addresses Setup Page contains a list of static MAC addresses.
Static Address can be added and removed from the Static Address Table
page. In addition, several MAC Addresses can be defined for a single
port.
1 Click Wired Ports>Address Tables > Static Addresses. The Static
Addresses Setup Page opens:
Figure 103 Static Addresses Setup Page
The Static Addresses Setup Page contains the following fields:
Interface — The specific port or LAG to which the static MAC address
■
is applied.
MAC address — The MAC addresses listed in the current static
■
addresses list.
VLAN ID — The VLAN ID attached to the MAC Address, and a VLAN
■
called a Routed Interface.Routed Interfaces are the internally-used
VLANs assigned to an port or trunk on which an IP address is
configured.
VLAN Name — User-defined VLAN name.
■
Status — MAC address status. Possible values are:
■
Permanent — The MAC address is permanent.
■
Delete on Reset — The MAC address is deleted when the device is
■
reset.