4. Place the FIB (shown in Figure 109) in a safe location.
Figure 109. FIB parts removed from the chassis
5. If needed, repeat steps 2 on page 112 through 3 on page 113 to remove the
Replace the fan interface board
6. To reinstall a fan interface board, or replace it with one from FRU stock, follow
Replacing an enclosure: 2076-92F
You can replace a faulty enclosure of a 2076-92F expansion enclosure with a new
one from FRU stock.
Before you begin
DANGER
114
Storwize V7000 Gen2 and Gen2+: Quick Installation Guide
other FIB.
the procedure in "Installing or replacing a fan interface board: 2076-92F" on
page 86.
Multiple power cords. The product might be equipped with multiple power
cords. To remove all hazardous voltages, disconnect all power cords. (L003)
(L003)
3
or
1
4
2
Need help?
Do you have a question about the Storwize V7000 Gen2+ and is the answer not in the manual?