Auto Setting; Auto Setting Of Measurement Items - Omron ZFX-C10 User Manual

AUTO Setting

Support functions for automatically optimally adjusting the measurement conditions are collectively referred to
as the "AUTO setting."
The [AUTO] button is displayed at the bottom of screens that support execution of the AUTO setting.
The following explains the screens in which the [AUTO] button is displayed and items that are automatically
set.

AUTO Setting of Measurement Items

Basic setting of measurement items is completed by selecting the measurement item, setting measurement
regions, and then executing automatic setting.
step1
Selecting measurement
items
Shape
Size
Pattern Sensiti.
Edge
Bright&Color
Application
Register Position
Cameras Item
Measurement
Measurement Measurement
type group
items items
Automatically Set Items
Item
Color filter
Model image
Threshold
Edge search color of
detailed conditions
Reference value
152
AUTO Setting
step2
Setting measurement
regions
New
Add func
Enclose the desired measurement
area.
Explanation
The currently displayed image is analyzed to automatically select the optimum color filter for measurement
items that use a color filter.
(Measurement items that use a color filter: Pattern Search, Sensitive Search, Position, Width, Count, Defect)
The image after the automatically set optimum color filter is applied is registered as the model for measure-
ment items that use a model.
When only the region is changed after AUTO setting is executed, the model image and not the color filter is
updated.
(Measurement items that require registration of the model: Pattern Search, Sensitive Search)
The threshold values are automatically set for the following measurement items:
(Area, Position, Width, Count, Bright, HUE)
The edge search color of detailed conditions is automatically set for measurement items in edge inspection.
(Measurement items in edge inspection: Position, Width and Count)
The measurement value of the currently displayed image is registered as the reference value.
This reference value is updated when the region is changed and AUTO setting need not be executed again.
Move [130,140]
TEA
step3
Executing automatic
setting
Register model
Reference model
TEA
Search region
Reference point
Img Adj Detail
Region Limits
AUTO
The optimum measurement
conditions are automatically set just
by selecting [AUTO].
Measurement conditions can also be
checked and changed.
ZFX-C User's Manual