Omron ZFX-C10 User Manual page 71

Threshold
This function sets the judgment conditions.
MENU mode - [Setup] - [Item] - [Limits]
Setup Item Description
Number of edges Sets the range of the number of edges to be judged as OK.
Range: 0 to 255
Average pitch Sets the range of the edge pitch to be judged as OK.
Range: 0 to 9999.999
(When calibration is OFF, the range becomes 0 to 640.)
Average width Sets the range of the edge width to be judged as OK.
Range: 0 to 9999.999
(When calibration is OFF, the range becomes 0 to 640.)
Image adjustment (if necessary)
The following items can be changed and set to the image of the measurement target.
MENU mode - [Setup] - [Item] - [Img Adj]
Item Description
Color filter
Color Pickup/Binary
Which of Color filter or Color Pickup is used can be selected at [Detail] - [Color mode]. The
Filtering
default is use of Color filter.
BGS level
Detailed settings (if necessary)
When measurement is not stable, adjust the detailed conditions.
MENU mode - [Setup] - [Item] - [Detail]
Setup Item Setting value
Measurement mode Normal (default value)
Fine
Color mode Filter mode
(default value)
Pickup mode
Target color Light (default value)
Dark
ZFX-C User's Manual
For details, see "Image Adjustment". p.80
Description
Selects this item in the case of measurement targets whose pin
width and pitch are at least two pixels.
Selects this item to stably measure widths narrower than nor-
mal and the number of gaps.
Color filter processing improves the contrast of images so that
edges are detected.
Specify the color to measure to find the edge of that color.
Selects the target color to be counted as the number of edges.
When a color camera is in use, the picked-up color is targeted
for counting when this setting is set to [Light].
Setting Measurement Items
69