Partial Function Settings - Omron ZFX-C10 User Manual

Partial Function Settings

Set the image capture area.
Limiting the image capture area in this way speeds up processing.
The items that can be selected by this function change according to the camera connected to the Controller
and shutter speed conditions.
List of Available Functions for Each Camera p.151
Important
When the partial function setting is changed, the size of the input image also changes. When the partial function set-
ting has been changed, set the measurement conditions including the model conditions of measurement items and
position shift compensation again.
MENU mode - [Setup] - [Cameras] - [Partial Function]
Each selection of [Size] switches the image capture area in the following order:
None (Full display)
Note
Adjustment of Image Capture Area
When 1/2 display or 1/4 display is displayed, the capture area can be adjusted up and down.
ZFX-C User's Manual
1/4 display
1/2 display
The capture area can be moved
to any position vertically.
85
Cameras/Lighting