Omron ZFX-C10 User Manual page 22

Note
• The lens has a fixed focal point. The actual detection range and focal point vary from lens to lens, so adjust the
distance to the measurement target after replacing the lens or camera.
• The camera mounting distance listed in the following tables is an approximate value. Mount the Camera so that
the distance to the measurement target can be adjusted easily.
• If the object size and detection range are incompatible, use a combination of a camera (without lighting), standard
CCTV lens and light source.
Camera Only p.22
Installing the mounting fixture
The mounting fixture can be installed on all of the four mounting surfaces.
Hooks
Grooves on camera
Removal procedure
20
Mounting and Connecting Devices
Mounting
fixture
Mounting fixture
1
Align the two hooks on one side of the mounting fix-
ture with the two grooves on the camera body.
2
Push the other hook down until it is snapped into
place.
Make sure that the mounting fixture is firmly fixed on the
camera.
3
Fasten the mounting fixture at the mounting location
with screws.
Tightening torque
M4: 1.2 N•m
1/4"-20 UNC: 2.6 N•m
1
Insert a screwdriver into the gap (one of the two gaps) be-
tween the mounting fixture and the camera case, and re-
move the mounting fixture
.
ZFX-C User's Manual