Omron ZFX-C10 User Manual page 74

Image adjustment (if necessary)
The following items can be changed and set to the image of the measurement target.
MENU mode - [Setup] - [Item] - [Img Adj]
Item
Color filter
Filtering
BGS level
Possible output results
The following values can be output when expressions are set.
Item
Judgment result
Density average
Density deviation
Reference density aver-
age
Reference density
deviation
Density average
difference
Density deviation
difference
72
Setting Measurement Items
Description
For details, see "Image Adjustment". p.80
Description
The judgment result is output. (0:OK, -1:NG, -2: not measured)
The average of the density inside the measurement region is out-
put. (0 to 255.0)
The brightness fluctuations in the measurement region are output.
(0 to 127.0)
The density average when the measurement region is set is output.
(0 to 255.0)
The density deviation when the measurement region is set is out-
put. (0 to 127.0)
The difference obtained by "measurement value - reference value"
is output. (0 to 255.0)
The difference obtained by "measurement value - reference value"
is output. (0 to 127.0)
Message
Judge (JG)
Density average (AV)
Density deviation (DV)
Ref. average (SA)
Ref. deviation (SD)
Average dif. (DA)
Deviation dif. (DD)
ZFX-C User's Manual