Omron ZFX-C10 User Manual page 141

Measurement Value Output
The measurement values for expressions that were set in 0 to 31 of [Add func/Calculation/Data] is output
before the judgment results output, when "Parallel Output ON" was selected as the data output destination in
the [System/Output/Data output] menu.
Only integer values are output. (The real values are rounded to the nearest integer.) Data is output in 2' s
complement format.
The measurement values for respective expressions are output in 16-bit at a time. When two or more expres-
sions are set, 16-bit measurement values are output sequentially by the number of times equivalent to the set
expressions.
DO15 DO14 DO13 DO12 DO11 DO10 DO9 DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1 DO0
Note
Values in the range -32,768 to 32,767 can be output. A value of -32,768 will be output if the measurement is less
than -32,768 and a value of 32,767 will be output if the measurement is greater than 32,767.
Output example
When measurement value is "+1234"
DO15 DO14 DO13 DO12 DO11 DO10 DO9 DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1 DO0
0 0 0 0 0
When measurement value is "-1234"
DO15 DO14 DO13 DO12 DO11 DO10 DO9 DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1 DO0
1 1 1 1 1
ZFX-C User's Manual
Measurement value for expression x
1 0 0 1 1 0
0 1 1 0 0 1
1 0 0 1 0
0 1 1 1 0
139
Signal I/O