Omron ZFX-C10 User Manual page 58

Region settings
This function sets the measurement region.
MENU mode - [Setup] - [Item] - [Region]
Item
Measurement region
Reference registration
Threshold
This function sets the judgment conditions.
MENU mode - [Setup] - [Item] - [Limits]
Setup Item
Area
Gravity XY
Axis angle
56
Setting Measurement Items
Description
This function sets the region to be measured.
Setting the Region p.178
When the measurement region is set, measurement is executed on the display image,
and the result of execution is registered as the reference value. To re-register only refer-
ence values, you can use this function to re-register only reference values based on the
image currently on screen.
Description
Sets the range of the area to be judged as OK.
Range: 0 to 9999999.999
(When calibration is OFF, the range becomes 0 to 307200.)
Sets the range of movement in the X- and Y- axes of the measurement target to be judged
as OK.
Range: -9999.999 to 9999.999
(When calibration is OFF, the range of movement for positions X and Y are 0 to 608 and 0
to 464, respectively.)
Sets the rotating range of the measurement tar-
get to be judged as OK.
Range: -90.0 to 90.0
-
+
ZFX-C User's Manual