Image Adjustment - Omron ZFX-C10 User Manual

Image Adjustment

This section describes the functions for apply filters, etc. to process images captured from the camera so that
they can be easier-to-measure. Items that can be set differ according to the measurement item and type of
camera. Only available items are displayed.
Color Filter
The contrast of images can be improved by passing images through color filters. This function can be set only
when a color camera is connected to the Controller. When a color filter setting is changed, a new image
processed by the color filter is displayed on the right side of the monitor. Set the color filter while monitoring the
image on screen.
Note
AUTO Setting p.152
When AUTO is set for measurement items that support use of color filters, the optimum color filter is automatically
set.
Color Filter p.186
MENU mode - [Setup] - [Item] - [Img Adj] - [Color filter]
Item
Select filter
Auto function
80
Setting Measurement Items
Description
The color filter can be selected as desired. (Red, Blue, Green, Yellow, Cyan, Magenta,
Gray, Custom)
When [Custom filter] is selected, any color in the color bar can be set to the filter.
Sets whether or not to perform automatic selection of color filter processing when the
automatic setting is executed.
On: The current image is analyzed to automatically select the optimum color filter each
time that the automatic setting is executed.
Off: The currently selected color filter is fixed, and is not cleared and held even if the
automatic setting is executed.
ZFX-C User's Manual