Frames - Omron NS10-TV Series Programming Manual

Section 2 NS Series Functions
NS Series Programming Manual

2-8-12 Frames

The color and size of buttons, lamps, and other frames can be set. The frame settings are made on the
Frame Tab Page of the Functional Object Properties Dialog Box.
1. Color (left and top)
3. Frame size (border not included)
Note: The numbers in the above diagram correspond to the descriptions below.
1
2
3
4
No. Setting
5 Three-dimensional
Frame
6 Draw border
7 Frame ON/OFF dis-
play
Frame ON/OFF Display
•
Link with Address ON/OFF
The button shape is updated when the specified address turns ON (1) or OFF (0).
Select the Link with address ON/OFF and click the Set Button to make the address settings.
Address
0
1
4. Border color (1 dot)
2. Color (right and bottom)
Select Three-dimensional Frame to add a frame to the object. De-select
Three-dimensional Frame to not have a frame for the object.
Select Draw border to draw a border on the frame. De-select this option if no
border is to be drawn.
Select Link with address ON - OFF to have the frame raised or depressed,
depending on whether the specified address is ON (1) or OFF(0).
Raised
Depressed
2-8 Common Functional Object Functions
Details
2-94
5
7
6