Omron NS10-TV Series Programming Manual page 353

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
11 Released Text
12 Detection Type
13 Auto switch
contents
14 Contents No.
15 Refer to the
String Table
16 String No.
17 Alarm message
18 Title
Sets the character color displayed when alarms or events are cleared (0 to 255).
Sets the method for detecting alarms and events.
Raise alarm on Set (to 1) of address: posedge
Raise alarm on Reset (to 0) of address: negedge
Sets whether or not automatic contents switching is enabled.
Automatically switch contents switching: ON
Do not automatic switch contents: OFF
Sets the contents number that is displayed when an alarm/event occurs (0 to 9999).
Sets whether to reference a message character string from the character string table.
Reference the character string table: ON
Do not reference the character string table: OFF
Sets the character string number of the referenced character string when a message
character string is referenced in a character string table.
Leave blank if the message character string will not be referenced in the character
string table.
Sets the display message (up to 80 characters).
Leave blank if the message character string will be referenced in the character string
table.
The CX-Designer version information and the title for each item will be displayed in
lines one and two of the CSV file. Do not change or delete this information.
2-304
2-14 Alarms and Events
Details