Omron NS10-TV Series Programming Manual page 249

Section 2 NS Series Functions
NS Series Programming Manual
Read Data from NS to PLC Data Block
Transfers one record of data from the specified addresses in the NS to the PLC Data Block address set
in each field.
No. Item
1 Address
2 Record Label
Write Data from PLC Data Block to NS
Reads the data from the PLC Data Block address set in each field to the specified NS address.
Specifies the PT memory address where the one record of data is stored.
Selects whether or not the record label is included in the data stored at a speci-
fied communications address.
Details
2-200
2-11 Multifunction Objects
1
2
1
2