Omron NS10-TV Series Programming Manual page 678

Appendices
NS Series Programming Manual
Supplement/
Enhancement
Ladder Monitor
Symbol table transfers
when transferring screen
data
Holding log and alarm
information when
transferring screen data
PLC data trace reading
Addition of European fonts
Video display mode setting
SAP (Smart Active Parts)
Temperature Controller
Unit
Ver. 7.0
Supplement/
Enhancement
Multi-vendor connectivity
NT compatibility
Holding previous system
memory values
Multilingual system
capability
Multifunction Objects
Machine Navigator
function
With version-2 NS-series PTs (except for the NS5-V2 and NSJ5), Ladder
Monitoring is built into the PT as a standard feature, so no separate Memory
Card is required. (A Memory Card is required for version-1 PTs, however, just as
before.) In addition, neither version-1 nor version-2 PTs are reset when starting
or ending the Ladder Monitor when Ladder Monitor version 2.8 is used.
These improvements make the Ladder Monitor easier to use and reduce
operating time.
When screen data is downloaded from the CX-Designer, the symbol tables are
downloaded together with it. Likewise, when screen data is uploaded, the symbol
tables are uploaded too.
It is now possible to select whether log and alarm information is to be initialized
when screen data is downloaded.
Trace results from data traces (which is a CPU Unit function) can now be read by
the PT and displayed in time chart format. (CSV files cannot be saved.)
This makes it possible, using just the PT without CX-Programmer, to isolate the
causes of errors that occur on-site.
All Russian and Greek characters are now available, and all characters are
half-width.
It is now possible to select from three patterns for image quality adjustment.
When a visual sensor is connected, even small display characters can be read. It
is now also possible to adjust the display position for RGB display.
SAP has been added for the EJ1 Modular Temperature Controller, G3ZA
Multi-channel Power Controller, and Troubleshooters.
It is now possible to connect the EJ1 Modular Temperature Controller to the PT
as a host.
It is now possible to connect NS-series PTs to the following devices.
• OMRON Trajexia Motion Controllers
• Yaskawa MP-series Machine Controllers
• Yaskawa F7-series Varispeed and VS Mini V7-series Machine Controllers
• Mitsubishi Q-series PLCs
System memory can now be allocated to PLC memory areas in the same way as
for the NT Series, enabling PLC ladder programs to be easily transferred when
migrating from the NT Series to the NS Series.
It is now possible to display at the next startup the screen that was being
displayed when the program was closed.
In addition to English and Japanese, the system now also supports German,
French, Italian, Spanish, and Chinese (both traditional and simplified).
Multifunction Objects have been added to functional objects.
With Multifunction Object, multiple processes can be registered and can then be
executed with the press of a button.
Processes that previously required the creation of macros can now be executed
by simply setting properties.
A Machine Navigator function and a functional object contents display function
have been added. Machine Navigator provides unified control of text and image
files (i.e., "contents") to be displayed, and the new display function displays
those contents.
Contents requiring association can be managed in ID units, and the display can
be easily changed by simply changing the ID specification.
A-35
Appendix-6 Additional NS Series Functions
Function
Function