Omron NS10-TV Series Programming Manual page 174

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
Switch Status
1
Apply String
2
3 Switch Labels for
Address ON/OFF
Link with Write
Address ON/OFF
Link with Display
Address1 ON/OFF
Link with the Specified
Address ON/OFF
Frame
Specify the color and size of the button frame to change the shape or color when the button is
depressed or raised. Refer to Frames under 2-8 Common Functional Object Functions for details.
N o t e
N o t e
N o t e
♦
The buttons are not linked to write address ON/OFF or the raised/depressed status of the frame when the
button action type is Momentary, SET, or RESET. The frame is concave when the button is pressed. To
make the frame concave when the write address is ON, set the same address as the write address to Link
with the specified address ON/OFF.
Flicker (Extension Tab)
Make flicker settings to make the functional object flicker (flash). Refer to Flicker under 2-8 Common
Functional Object Functions for details.
Write (Extension Tab)
Use the write to display a confirmation dialog box before writing values to a write address. The confir-
mation message can be changed. Refer to Write Settings under 2-8 Common Functional Object Func-
tions for details.
1
2
3
Select ON or OFF from the displayed list and edit the label for when the
specified address is ON/OFF. The ON/OFF label is switched each time the
button is clicked.
Uses the current character string for all object states.
The string is used as the label not only for the selected object, but for all other
object states as well.
If the Switch Status cannot be set, then the Apply String Button can also not be
set.
Switches the label when the specified address turns ON or OFF.
ON/OFF is also enabled when Switch labels for Address ON/OFF is selected.
Switches label display when the Write Address, which is specified on the
General Tab Page, turns ON or OFF.
Switches label display when Display Address1, which is specified on the
General Tab Page, turns ON or OFF.
Switches label display when the specified address turns ON or OFF.
2-125
Details
2-9 Buttons