Omron NS10-TV Series Programming Manual page 343

Section 2 NS Series Functions
NS Series Programming Manual
Image Position Tab Page
Select the part of the image that is to be displayed on the screen. This function is designed to modify
non-display areas contained in the data so that only necessary parts are displayed.
No. Item
1. Start Point of
Video Display
Frame
2. Space Line
Setting
Set the start position to get the data from the channel.
Lines
Dots
Display area for
video display
Set the range as shown below.
Dot position: − 64 to 127
Line position: − 5 to 31
The image will be irregular if the dot position or line position cause the input image data to
exceed the valid range.
If image size is smaller than display area, spare part will be filled with black and displayed.
Set the size of fill area.
Display area of
the object.
The area set as space line is filled with the black on display area.
Set within the ranges shown below.
320x240: 0 to 239
640x480: 0 to 479
800x600: 0 to 599
2-294
1
2
Details
Starts Video display area
from this position.
The data that is
input.
The data that is
displayed.
Image
Space line
2-13 Display