Omron NS10-TV Series Programming Manual page 171

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
4
Rectangle
2 Light
(Type 1)
Rectangle
2 Light
(Type 2)
Rectangle
2 Light
(Type 3)
Rectangle
2 Light
(Type 4)
Select Shape
(Type 1)
Select Shape
(Type 2-1)
Select Shape
(Type 2-2)
Select Shape
(Type 3)
N o t e
N o t e
N o t e
♦
If frames are switched frequently, the display update may take some time and communications may
be delayed. Care must be taken because this means that sometimes the momentary ON/OFF
buttons may not operate normally.
Color/Shape Tab Page
The Color/Shape Tab Page is used to select the ON/OFF Button display status.
If Select shape is selected under Button type, select a display shape from the list. For all other cases,
select one of the 256 colors. Depending on the button type, only colors 1 and 2 may be used, or all
colors 1 to 4 may be used.
Similarly for shape specification, only shapes 1 and 2 may be used or all shapes 1 to 4 may be used,
depending on the button type.
The top color changes based on whether the write address is ON or OFF and the bottom
color changes based on whether display address 1 is ON or OFF.
Accesses the write address.
Accesses display address 1.
The top color changes based on whether display address 1 is ON or OFF and the bottom
color changes based on whether display address 2 is ON or OFF.
Accesses display address 1.
Accesses display address 2.
The whole button color changes based on whether the write address is ON or OFF and the
color of a circle inside the button changes based on whether display address 1 is ON or OFF.
Accesses display address 1.
Accesses the write address.
The color of the circle inside the button changes based on whether display address 1 is ON
or OFF and the whole button color changes based on whether display address 2 is ON or
OFF.
Accesses display address 1.
Accesses display address 2.
The button shape changes based on whether the write address is ON or OFF.
Various button shapes can be set by selecting from the list.
The button shape changes based on whether display address 1 is ON or OFF.
Various button shapes can be set by selecting from the list.
The button shape changes based on whether display address 1 is ON or OFF.
The button shape also changes when the button is pressed.
Various button shapes can be set by selecting from the list.
Changes the button shape based on the status of display address 1 and display address 2
(i.e., 1/1, 1/0, 0/1, or 0/0).
Various button shapes can be set by selecting from the list.
2-122
Details
2-9 Buttons