Omron NS10-TV Series Programming Manual page 274

Section 2 NS Series Functions
NS Series Programming Manual
No. Item
3 Display Method
Bit Address 1, 2
(4 Colors)
Bit Address 1, 2
(4 Shapes)
Bit Address 1, 2
(Upper/Lower)
Bit Address 1, 2
(Circle/Whole)
Same Value
Selects the method for color/shape changes for the specified shape. Refer
to Display Method Settings later in this section for details.
Switches color (shape) depending on the ON/OFF status of two specified
display addresses.
Display Address (1): OFF
Display Address (1): OFF
Display Address (2): OFF
Display Address (2): OFF
Display Address (1): OFF Display Address (1): ON
Display Address (2): ON Display Address (2): ON
This option can be selected only when Rectangle 2 Light (Upper/Lower)
has been specified.
Switches the upper and lower display colors depending on the ON/OFF
status of two specified display addresses.
Displays the upper ON or upper OFF color depending on
the ON/OFF status of Display Address (1).
Displays the lower ON or lower OFF color depending
on the ON/OFF status of Display Address (2).
This option can be selected only when Rectangle 2 Light (Circle/Whole)
has been specified.
Switches the whole display color and the circle section display color de-
pending on the ON/OFF status of two specified display addresses.
Displays the ON/OFF color for inside the circle
depending on the ON/OFF status of Display Address (1).
Displays the ON/OFF color for the whole button
depending on the ON/OFF status of Display Address (2).
Displays the set value match color (shape) if the contents of the specified
address and the set value match. Displays the normal color (shape) if the
values do not match.
Set value matched color (shape)
Normal color (shape)
Display address Display address
contents and set value contents and set value
do not match. match.
2-225
2-11 Multifunction Objects
Details