Omron NS10-TV Series Programming Manual page 377

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
3 Delete
4 Icon
5 Logging Points
Total
"Always" Log
Address Total
Always Log-
ging Points
6 Advanced
Setting
N o t e
N o t e
N o t e
♦
The available number of "Always logging points" differs depending on the sampling cycle for the
data log group and the log address storage type.
♦
The following option must be set in advance before using the "always logging" function.
1. Select PT – System Setting and open the History Tab Page.
2. Select the Hold data of always logging (Data Log) Option and click the OK Button.
♦
When the "always logging" function is being used, the "broken-line graph history" function cannot be
used.
To delete a set data logging group, select the display line for that group and click the
Delete Button.
A confirmation message will be displayed. Click the Yes Button to delete the selected
group.
Click the Icon Button to display the Details Dialog Box. BMP/JPEG files can be speci-
fied to the icon for the data log object.
The total number of logging points is displayed. Logging is possible for up to160,000
points. (NS5: 120,000 points). Refer to Calculating Logging Points on page 2-334 for
details.
Displays the total number of addresses that are always logged. Up to 128 addresses
can be constantly logged.
The number of points for constant logging is displayed. Constant logging is possible for
up to 50,000 points. Refer to Calculating Logging Points on page 2-334 for details.
Click the Advanced Setting Button to set display settings for data log graphs. For
details, refer to Display Settings for Data Log Graphs.
2-328
Details
2-15 Data Logs