Omron NS10-TV Series Programming Manual page 203

Section 2 NS Series Functions
NS Series Programming Manual
General Tab Page
Sets the lamp shape and address.
No. Setting
1 Object
Comment
2 Display Ad-
dress
3 Lamp type
Color/Shape Tab Page
Specifies the shape and color when lamps are ON and OFF.
If a selection other than Select shape is made for the lamp type, one of 256 colors can be selected.
If Select shape is selected under Lamp type, select a display shape from the list.
Sets an explanatory comment for the pasted object.
(Up to 32 characters.)
Sets the address referenced for lamp display directly or by using the Set Button. Only
bits can be set.
Select from the five lamp shapes shown below.
Single-lined Single-lined Double-lined
circle rectangle
Various lamp shapes can be selected from the list and displayed when the shape is
specified. The image displayed in the Properties Dialog Box is a sample. The actual
display will depend on the settings made on the Color/shape Tab Page.
2-154
1
2
3
Details
Double-lined Select
circle rectangle shape
2-10 Lamps