Omron NS10-TV Series Programming Manual page 466

Section 2 NS Series Functions
NS Series Programming Manual
No.
1 Screen No.
2 Contents
3 Switch
4 No. of contents
5 Address for
switching con-
tents
6 Link with alarm
7 Use a switch
direction address
Item
Displays the screen number and title of the screen currently
being edited.
The Contents Switching Setting screen will be displayed
when the screen number is clicked.
A list of the contents display ID numbers created for the
screen and the registered contents will be displayed.
The registered strings will be displayed for strings.
File names will be displayed for image files.
The edit setting screen will be displayed when each contents
is clicked.
Switches the label being edited.
Sets the number of contents to between 2 and 10,000.
Sets the address for switching contents (the communications
address for specifying contents switching).
Select this checkbox to switch contents when an alarm/event
occurs or is cleared.
When an alarm event occurs, the contents with the number
set in the Alarm/Event Settings Dialog Box will be displayed.
When an alarm/event is cleared, the contents for the number
set under Contents No. when alarm does not occur will be
displayed.
If this checkbox is selected, the contents will be displayed
and refreshed while the set communications address is ON.
For details, refer to Switching Specification later in this sec-
tion.
If this checkbox is deselected, the contents will switch when
the contents of the address for switching contents changes.
2-19 Machine Navigator Function
Details
2-417