Omron NS10-TV Series Programming Manual page 548

Section 2 NS Series Functions
NS Series Programming Manual
Host name
Host type
Network address
Node address
IP address
Route path
Operation log display
Alarm history display
Error log display
Device monitor
Communications test
Video Configuration
Display Capture Data
USB device list
PLC Data Trace
Version display
LCD check
Touch switch check
Touch panel Calibration (NS15 Only)
Video input method
Save in a file
Key Status Address
: Can be set, × : Cannot be set,
: Can be set using different CX-Designer menu
Note 1. Set using Title Tab Page in the Project Property Dialog Box under PT - Project Properties .
2. Set using Switch Labels Tab Page in the Project Properties Dialog Box under PT - Project Properties .
3. Set in the Alarm/Event Parameter Setting Dialog Box, which is displayed when the Parameter Setting
Button is pressed. The Parameter Setting Button is found in the Alarm/Event Setting Dialog Box under
PT - Alarm/Event .
4. Set in the Password Setting Dialog Box under PT - Password setting .
5. Set in Video Control – Vision Sensor Console or Video Control – Contrast Adjustment in the Command
Button Setting Dialog Box to control images.
6. Set on the Select Language Tab of the Project Property Dialog Box under PT - Project Properties .
7. Set using Switch Labels Tab Page in the Project Property Dialog Box under PT – Project Properties .
8. A button to switch to the Display Capture Data screen can be created with the Display System Menu
command button function.
9. Set by selecting PT – Communication Setting on the Comm. Setting Dialog Box.
10. Only for hosts connected via Ethernet or Controller Link.
11. If the screen saver startup time is specified indirectly, only the allocated address will be displayed.
12. Only when connected to the host through EtherNet/IP. The setting cannot be changed if the host type
is set to EtherNet/IP,
13. Only printers connected to the USB host connector will be displayed. (PictBridge-compatible printers
will not be displayed.)
Refer to the System Settings and Project Properties settings in the CX-Designer Online Help and Sec-
tion 6 System Menu Operations in the NS Series Setup Manual (Cat. No. V083) for detailed explana-
tions of CX-Designer system settings and the PT System Menu.
Item
: Display only
2-21 System Settings and System Menu
CX-Designer system setting
(See note 9.)
(See note 9.)
(See note 9.)
(See note 9.)
(See notes 9 and 12.)
(See notes 9 and 12.)
×
×
×
×
×
(See note 5.)
(See note 8.)
×
×
×
×
×
×
2-499
PT System Menu
(See note 10.)
(See note 10.)
(See note 10.)
(See note 10.)
(See note 12.)
(See note 12.)
(See note 13.)
×
×
×