Omron NS10-TV Series Programming Manual page 100

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
1 Switch
2 Host
3 Name or Address
4 Name
5 Data
6 Area
7 Address
8 I/O Comment
N o t e
N o t e
N o t e
♦
With any one of the input methods, a communications address can be input when specifying the
address. In this case, input the address in the Name or Address Field. The address can be input with
an index
Method 3: Selecting a Registered Symbol
Select the List Tab from the Switch Options. Select the desired symbol from the list of symbols regis-
tered in the symbol table.
Switches the input method.
Select the pre-registered host name or PT memory (internal PT memory).
Input the name of the desired symbol.
Displays the symbol name set in the Name or Address Field.
Displays the data type that can be set. (CHANNEL stands for word data.)
When a symbol name that is not registered in the symbol table has been set in the
Name or Address Field, select the area name here.
When a symbol name that is registered in the symbol table has been set in the Name or
Address Field, that symbol's area name will be displayed here.
When a symbol name that is not registered in the symbol table has been set in the
Name or Address Field, set the address here.
When a symbol name that is registered in the symbol table has been set in the Name or
Address Field, that symbol's address name will be displayed here.
When a symbol name that is not registered in the symbol table has been set in the
Name or Address Field, set an I/O comment here.
When a symbol name that is registered in the symbol table has been set in the Name or
Address Field, that symbol's I/O comment will be displayed here.
2-51
2-5 Communications Address Settings
1
2
3
4
5
6
7
8
Details