Omron NS10-TV Series Programming Manual page 106

Section 2 NS Series Functions
NS Series Programming Manual
1. Select the direct address (symbol) to be converted in the symbol table.
2. Double-click the address to display the Address Setting Dialog Box. Click the Input Tag Button.
3. The host setting, data type, and I/O comment will be inherited if the host supports tags. If the host
does not support tags, the host will be changed to a host that support tags.
4. Adjust the settings as required, and then click the OK Button.
5. The address will be converted to a tag.
N o t e
N o t e
N o t e
♦
Tags can be converted to direct addresses.
2-5 Communications Address Settings
Click here.
If the host before conversion
does not support tags, it will be
changed to support them.
The host setting before the
change will be inherited if the host
that was set before the change
supports tags.
2-57
Converted to
tag.