Omron NS10-TV Series Programming Manual page 222

Section 2 NS Series Functions
NS Series Programming Manual
No. Item
1 Double Press
2 ON Delay
3 OFF Delay
4 Input
5 Prohibit
simultaneous
pressing
6
Record to
operation log
7 Do not allow
sound for this
object
Executes the set functions when the Multifunction Object is pressed twice in a row.
The Reception start time and Reception closing time can be set.
The reception start time can be set to 0, 0.5, or between 1 and 15 seconds.
The reception closing time can be set to 0.5 or between 1 and 30 seconds. Always
set the reception closing time later than the reception start time.
The functions set for touch operation will be executed when the Multifunction Object
is held down until the delay time passes.
The Set time can be set to 0.5 or between 1 and 15 seconds.
The functions set for execution at Touch OFF timing will be executed when the time
specified under Set time has passed after the Multifunction Object is released.
The Set time can be set to 0.5 or between 1 and 15 seconds.
Used to specify whether or not inputs are accepted. This function can be used as an
interlock function.
The following selections are available.
Enable input
Disable input
Enable Input When Indirect Address ON
Enable Input When Indirect Address OFF
If you select either Enable Input When Indirect Address ON or Enable Input When
Indirect Address OFF, set the address for input control in the Indirect Reference field.
Select this checkbox to prohibit simultaneous pressing.
Select this checkbox to keep a log of Multifunction Object operations. Set the mes-
sage character string set in the operation log for each label to 32 characters or less.
The touch switch input sound can be set separately to OFF so that the Multifunction
Object will not produce a sound when operated. All object touch switch sounds will
be OFF if the touch switch input sound is set to OFF under the NS System Menu or
on the PT Tab Page of the CX Designer System Settings.
Details
2-173
2-11 Multifunction Objects
1
2
3
4
5
6
7
8