Omron NS10-TV Series Programming Manual page 139

Section 2 NS Series Functions
NS Series Programming Manual
English Screen
R e f e r e n c e
R e f e r e n c e
R e f e r e n c e
♦
The number of labels is set under PT - Project properties . Refer to Project Properties in Section 2
NS Series Functions.
♦
Labels can be switched by setting the desired label number from the host to system memory ad-
dress $SW10.
♦
For ON/OFF buttons, bit lamps, labels, and Multifunction Objects, select a character string from the
character string table to be displayed as a label. Refer to 2-8-20 String Table for details.
No. Setting
1 Switch
2 Label
3
Text Attribute
Button
4 Apply Attrib-
ute Button
5 Indirect Ref-
erence of
Text Color
6 Fit the Object
Size
7 Use the
String Table
Japanese Screen
Switches labels.
Enter the character string to be displayed as a label. (Labels and Multifunction Objects:
Up to 256 characters; Other functional objects: Up to 64 characters)
Displays the Text Attribute Dialog Box.
Set the text attributes such as font, size, and color for the label.
Displays the Apply Text Attribute Dialog Box.
This option applies the text attribute for the current label to other labels. It is disabled
(grayed out) when only 1 label is registered.
Select this check box to change the label text color based on the value at a specified
address.
Set a color code between 0 and FF at the address.
Select this check box to automatically adjust fonts to the size of objects when vector
fonts are selected.
Select this checkbox to select a label string from the strings registered in the string
table. (ON/OFF buttons, bitmaps, labels, and Multifunction Objects only)
2-8 Common Functional Object Functions
Labels can be
changed during
PT operation
1
2
3
4
6
5
7
Details
2-90