Omron NS10-TV Series Programming Manual page 332

Section 2 NS Series Functions
NS Series Programming Manual
General Tab Page
Sets the values referenced for scale shape and level display and the comment.
No. Setting
1 Object
Comment
2 Display
direction
3 Scale
4 Set 0 as
origin
5 Storage type
6 Address
N o t e
N o t e
N o t e
♦
Sometimes the gaps between divisions will not be even, depending on the number of divisions and the
size of the object.
Sets an explanatory comment for the pasted object. (Up to 32 characters.)
Select a display direction of Up, Down, Left, or Right.
Set whether to use a scale. If a scale is used, set the number of divisions (1 to 99), the
scale color, and the horizontal size (4 to 32).
If Set 0 as origin is selected, the border will be 0 and the level will be displayed in the
specified display for positive values and in the opposite direction for negative values.
Example: For Up display direction
Positive
0
Negative
Select and set the storage type from the pull-down list.
Sets the address to access the data. Only a word address can be set.
1
2
4
5
3
6
Details
2-283
2-13 Display