FUEL SYSTEM
Fuel Tank Removal
See Chapter 5 for body removal procedures to gain access the
fuel tank.
1.
Completely drain fuel from fuel tank. Be sure the fuel
valve is set to "RES" to get the majority of the fuel drained
from the tank.
2.
Remove the vent line near the filler neck.
3.
Remove the two bolts that attach the fuel tank to the frame.
4.
Carefully lift up on the fuel tank.
5.
Place a shop rag or towel underneath the tank and remove
both fuel lines from the tank.
6.
To reinstall the tank, reverse the removal procedure. Be
sure to torque the tank mounting bolts.
Fuel Tank Mounting Bolt Torque
103 in. lbs. (12 Nm)
4.16
Fuel Valve Location
Predator 50 / Outlaw 90
Predator 50
Shown
Predator 50
Shown
Fuel Lines
LH side of ATV
Predator 50 / Outlaw 90 - Fuel Valve
OFF
ON
Predator 50
Fuel Valve
Outlaw 90
Fuel Valve
RES