Transmission Assembly
87 in. lbs. (10 Nm)
25 ft. lbs. (34 Nm)
IMPORTANT: To reassemble the transmission, reverse
the disassembly procedure, refer to exploded view, and
review the following information and special notes.
1.
Use caution when installing the gear position indicator
spring (A) and pin (B) located in the end of the shift shaft.
Removal of the indicator switch (located under the clutch
cover) is recommended.
87 in. lbs. (10 Nm)
2.
B
A
ENGINE / TRANSMISSION
Check transmission operation before final assembly, and
after installing outer cover and output shaft.
FORWARD
NEUTRAL
(90 cc)
REVERSE
(90 cc)
3
3.37