Indicator Light / Ignition Switch Replacement
1.
Remove the (3) screws retaining the upper portion of the
pod.
2.
Disconnect the ignition switch harness and/or indicator
light harnesses.
3.
To remove the indicator lights and/or ignition switch,
remove the retaining nut(s) and remove the component.
NOTE: The
indicator
assembly. Bulb replacement is not possible.
Indicator Lights Shown
lights
are
a
complete
BODY / SUSPENSION / STEERING
SUSPENSION
50cc Shocks and Springs
Front Shocks
25 ft. lbs.
(34 Nm)
90cc Shocks and Springs
25 ft. lbs.
(34 Nm)
Front Shocks
Rear Shock
36 ft. lbs.
(49 Nm)
Rear Shock
36 ft. lbs.
(49 Nm)
5.11
5