Steering - 50Cc; Steering Assembly Exploded View; Steering Post Removal - Polaris PREDATOR 50 2009 Manual

12. 50cc - Remove the (2) through-bolts, exhaust mount bolt
and lower shock mounting bolt from the swing arm and
remove the swing arm from the ATV.
90cc - Remove the (1) through-bolt on 90cc models as
shown in the second image below.
Predator 50
Sportsman / Outlaw 90
13. To reinstall, reverse steps 1 - 12.
NOTE: When installing the axle nuts on 50cc
models, torque the first nut to 43 ft. lbs. (58 Nm).
Then tighten the second jam nut against the first nut
and torque to the same value.
14. Torque all other fasteners to specification. See torque
specification table on page 5.2
BODY / SUSPENSION / STEERING

STEERING - 50CC

Steering Assembly Exploded View

16 ft. lbs.
(22 Nm)
25 ft. lbs.
(34 Nm)

Steering Post Removal

1. Remove handlebar fasteners and retainer block.
2. Remove the upper steering post mounting bolts.
50cc Models
16 ft. lbs.
(22 Nm)
16 ft. lbs.
(22 Nm)
25 ft. lbs.
25 ft. lbs. (34 Nm)
(34 Nm)
40 ft. lbs.
(54 Nm)
Upper Mounts
5.17
5