Kick Start; Kick Start Disassembly / Inspection - Polaris PREDATOR 50 2009 Manual

KICK START

Kick Start Disassembly / Inspection

CAUTION
The kick start spring is under tension. Wear face
protection during disassembly and assembly of the
kick start mechanism.
NOTE: It is not necessary to remove the kick start lever or
kick drive components to remove the engine cover.
Bushing
Return spring
O-ring
Kick
Gear
Kick pinion & drag spring
1. Remove clutch cover and cover gasket. (Chapter 7)
2. Remove the kick pinion (A) with drag spring attached by
rotating the kick start pedal.
3.
Washer
4.
Retaining
ring
5.
A
ENGINE / TRANSMISSION
Disconnect hooked end of spring and set against stop at (B).
B
Mark the shaft at the opening of the kick start pedal (C), or
note position of kick start pedal before removing.
C
Remove retaining ring (D) and backing washer from the
shaft.
D
3
3.41