CVT SYSTEM
Clutch Cover Removal
1.
Remove the left foot rest.
2.
Loosen the duct clamps and slide ducts upward off cover.
3.
Remove all screws and cover with kick start lever attached.
7.4
Drive Belt Removal
1.
Remove O-ring and nut from driven clutch.
2.
Pull outer sheave of driven toward you and push belt as far
as possible into driven sheaves to create belt slack.
3.
Slide driven clutch off shaft with belt. Remove belt from
driven clutch sheaves and then from drive clutch.
DRIVE CLUTCH SERVICE
Drive Clutch Disassembly and Inspection
1.
Remove outer drive clutch sheave and drive belt. Note
parts assembly order.